|
|
|
|
|
Creative Thermal Solution
TYR PC-X500 features multi-heat zone design, one zone one top holds two opticals, one floppy, four HDDs and a power supply unit. Lower part holds the motherboard, to separate the heat sources for better thermal solution.
|
|
|
|
|
|
|
|
There are 120mm intake fans(speed adjustable from1020-1200-1500RPM; factory set to mid speed)，large size fan can run in slow RPM, but still can input a large amount of air to cool the system down.
|
|
|
|
|
|
|
|
There are two air intake vents at the side of the case, allow cold air to enter the case to cool the system down. There are air filter fitted with intake fans.
|
|
|
|
|
|
|
|
There is a 120mm exhaust fan at the rear of the case in the M/B zone(speed adjustable from 1020-1200-1500RPM; factory set to mid speed), it can remove the system hot air out of the case fast and run silently.
|
|
|
|
|
|
|
|
There are a 120mm exhuast fan at the rear of the Upper zone, and the fan speed can be adjust from 1020 to 1200 to 1500RPM, to remove the hot air out of the case.
|
|
|
|
|
|
|
|
TYR PC-X500 has fitted a three speed fan controller, user can adjust the fan speed to get the best balance between silent and cooling.
|
|
|
|
|
|
|
|
For professional users, TYR PC-X500 also support liquid cooling system, there are four openings at the rear for water tube to pass through.
|
|
|
|
|
|
|
|
Where air enter the chassis, there is a need for an air filter to hold the dust.
In the front there is a washable air filter, it can easy remove, no tool required, and it is recyclable.
|
|
|
|
|
|
|
|
TYR PC-X500 equipped a vented PCI bracket, it can improve the cooling issue at the lower part of the motherboard.
|
|
|
|
|
|
|
|
There are few openings on the motheboard tray to allow the air to cool the rear of the motherboard.
|
|
|
|
<PREV
|
|
NEXT>
|
| |
|
|
|
|
|
|
|
|
